Smart Life Sport Health Fashion Cpu-nrf52832

nRF52832-MDK
An Open Source, Micro Development Kit for IoT Embedded Applications using nRF52832 SoC¶

Annotation

There are 2 versions of nRF52832-MDK bachelor:

• V1: with Micro USB socket and headers soldered in

• V2: without headers soldered in and can be connected to PC without any cable

Only cull one that'due south correct for you!

Description¶

The nRF52832-MDK is a fully open-source, versatile single board evolution kit for Bluetooth® depression energy, ANT and 2.4GHz proprietary applications using the nRF52832 SoC.

The kit gives access to 24 I/Os and interfaces via headers and has a RGB LED which is user-programmable. Information technology also has a ii.4GHz chip antenna onboard which is quite user-friendly to develop IoT wireless applications.

It supports the Nordic offical SDK using GCC, Keil and IAR. Program/Debug options on the kit is DAPLink.

The nRF52832-MDK tin can likewise exist used to play with multi-frameworks such every bit: nRF5 SDK, nRF5 SDK for Mesh, Mbed Os five, Zephyr, Mynewt, JerryScript, Espruino, MicroPython, Web Bluetooth, Eddystone, etc.

Hardware Specification¶

nRF52832-MDK provides the following hardware features:

• Nordic Semiconductor nRF52832

  • ARM® Cortex™-M4F
  • 512kB Flash Retentivity + 64kB RAM
  • Bluetooth low energy, Pismire and 2.4GHz
  • NFC™-A tag

• Plan/Debug options with DAPLink

  • MSC - elevate-n-drop programming wink memory
  • CDC - virtual com port for log, trace and terminal emulation
  • HID - CMSIS-DAP compliant debug channel

• Upwards to 24 GPIOs at headers

• Reset Button

• RGB LED

• 2.4GHz flake antenna

• 3.3V regulator with 1A elevation current output

• VBUS & VIN Power-Path Management

• Breadboard-friendly

• Two dimensions available:

  • V1: 48mm x 18mm x 13mm with headers soldered in
  • V2: 63mm x 18mm ten 4mm without headers soldered in

Pinout Diagram¶

Powered by nRF52832 SoC¶

The nRF52832 SoC is a powerful, highly flexible ultra-low power multiprotocol SoC ideally suited for Bluetooth® low energy, ANT and 2.4GHz ultra low-ability wireless applications. The nRF52832 SoC is built around a 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM. The embedded 2.4GHz transceiver supports Bluetooth low free energy, Ant and proprietary 2.iv GHz protocol stack. It is on air compatible with the nRF51 Series, nRF24L and nRF24AP Serial products from Nordic Semiconductor.

DAPLink Integrated¶

Arm Mbed DAPLink is an open-source software project that enables programming and debugging awarding software on running on Arm Cortex CPUs. Commonly referred to as interface firmware, DAPLink runs on a secondary MCU that is fastened to the SWD port of the application MCU. Enumerating as a USB composite device, information technology creates a bridge betwixt your development computer and the CPU debug admission port. DAPLink enables developers with:

• MSC - elevate-due north-driblet programming flash retentivity
• CDC - virtual com port for log, trace and terminal emulation
• HID - CMSIS-DAP compliant debug aqueduct

Multi-Frameworks Supported¶

The nRF52832-MDK can exist used to play with multi-frameworks such as: nRF5 SDK, nRF5 SDK for Mesh, Mbed Os 5, Zephyr, Mynewt, JerryScript, Espruino, MicroPython, Web Bluetooth, Eddystone ....

Framework	Cursory Description
nRF5 SDK	Software Development Kit for nRF51 and nRF52 Series
nRF5 SDK for Mesh	Software Development Kit for Bluetooth mesh solutions using nRF51 Series and nRF52 Serial
Mbed OS 5	An Open Source Embedded Operating System designed specifically for the "things" in the Net of Things.
Zephyr	A Pocket-sized, Scalable Open Source RTOS for IoT Embedded Devices.
Mynewt	An OS to build, deploy and securely manage billions of devices.
JerryScript	A Ultra-lightweight JavaScript engine for the Internet of Things.
Espruino	A JavaScript interpreter for microcontrollers. It is designed for devices with as trivial as 128kB Flash and 8kB RAM.
MicroPython	A lean and efficient Python implementation for microcontrollers and constrained systems.
Web Bluetooth	Bluetooth support for the Spider web.
Eddystone	A protocol specification that defines a Bluetooth low free energy (BLE) bulletin format for proximity buoy letters.
....

Online Document¶

The excellent project document is provided with nRF52832-MDK. It'south generated by MkDocs and hosted on GitHub.

Resource¶

Releases	Design Files
V2.0	nRF52832-MDK V2.0 Schematic nRF52832-MDK V2.0 PCB nRF52832-MDK V2.0 3D Step
V1.1	nRF52832-MDK V1.1 Schematic nRF52832-MDK V1.1 PCB nRF52832-MDK V1.1 3D STEP
V1.0	nRF52832-MDK V1.0 Schematic nRF52832-MDK V1.0 PCB nRF52832-MDK V1.0 3D Pace

Create an Issue¶

Interested in contributing to this project? Want to report a bug? Experience complimentary and click here:

Share this post